Changes from 074e to 074f:


Changed
=======

p3 pattern length value edits made finer - long values can be edited in single ticks
coarse steps (with encoder held) reduced to 12 ticks per click


Fixed
=====

ck pattern:
auto-length adjust when changing grid timebase improved
slope edit behaviour when empty step is used cleaned up

p3 pattern:
repeat events behaviour fixed
p3 random masking probabilities fixed
delete + gang leaves all steps un-ganged, drops out of gang mode

force-to-scale moving to nearest active note in either direction, instead of downward bias




Previous Changes from 073b to 074e:

Added
=====

ck pattern now has bar length in steps (last step) value
In drum grid edit, hold LAST and press step key to set length of 1 bar
Total length of a pattern = (last step) * (bar length) * (grid timebase)

When changing grid timebase, bar length will be auto-adjusted to keep the same overall pattern length
where possible.  Some changes of timebase may require manual adjustment of bar length.


SWING previously applied a time delay to every second step in a ck pattern via real-time quantisation (quant% track value)
After introduction of grid timebase, swing has been altered to give a 16th note shuffle effect, even
on patterns with a finer timebase setting. e.g. 32nd note flams will play with 16th note shuffle

Bar follow enabled in event list edit (press BAR to toggle)

Added a clear of recently-sent MIDI state to ensure all pgms and CCs are re-sent for a new SONG,
even if the same value had been sent during the previous song - to ensure multiple control CCs take
effect as expected


Fixed
=====

better checks for memory full error when allocating space for pattern backups, etc.

delete of saved track values in mixer view, using DELETE + <press track encoder>

clear assignment of knobs to track values which are manually removed from an instrument

drum edit, knob A numeric value for new note velocities is moved up to avoid clash with bar 16 indicator

validation of clipboard contents before paste into ck pattern

full reset of USB transmit state if interface is re-initialised
added buffer over-flow detection for USB transmit buffers - LED below step 16 flashes red